Linealuce mini 47 recessed

The Linealuce is a linear product that brings architectural details on buildings to life with light. The range has now been extended with higher performance solutions that minimize energy consumption per meter, in accordance with the size of the wall, or building being lit by the grazing light. Linealuce models are fitted with a wall grazing optic available with different powers per linear metre so the flux can be optimized according to the height to be lit (up to 5 metres for the Linealuce Mini and up to 15 metres for the compact version). This type of grazing light enhances surface textures and creates positive-negative effects when installed on openings. • Floor, wall or ceiling recessed luminaire intended for use with monochromatic and LED and RGBW light sources (44-52Vdc DMX-RDM), Tunable White and RGB (48-52Vdc DMX-RDM). • Comprising body, casing and end caps to be ordered separately. • Comprising body with housing for DMX-RDM and DALI drivers. • Extruded aluminium body and flush end caps in die-cast zamak complete with silicone gaskets. • Liquid acrylic paint ensuring high resistance to atmospheric agents and UV rays. • Optical compartment closed at the top by a 8mm thick transparent glass screen secured with silicone. • Supplied with double nickel-plated brass cable gland, outgoing rubber cables and IP68 male and female connectors at the end for pass-through wiring. • Equipped with optics with plastic lenses (methacrylate). • Wall-grazing Spot light distribution optics (WGS), Wall grazing Medium (WGM) and Wall grazing WF (Wide Flood), F (Flood) • Non-slip complying with R13 DIN 51130 certification. • Indoor accessory filters for elliptical distribution. • Indoor accessories: Longitudinal blade louvre • Electronic power supply unit to be ordered separately IP67. • The IP67 power supply unit can be housed inside the outer casing in order to power several bodies with a single power supply unit (see instruction sheet) • Built-in DMX-RDM driver with Insulation Class III • Built-in DALI driver with Insulation Class II • All external screws used are in A2 stainless steel. • Mechanical system designed to obtain continuous rows up to 10.5 m while considering environmental thermal expansion between -30 °C and +50 °C • The appliances are designed and tested to withstand a static load of up to 20000 N and are suitable for vehicles with tyres. • The appliances cannot be used in lanes where they are subjected to horizontal stresses arising from acceleration, b