Room acoustic systems

Room Acoustic Systems & Noise Virus Catcher® are produced in MDF, in OAK PLYWOOD or in CELLON®. Material MDF board is a wood-based material made of finely fibrillated softwood, which is pressed into a board product that is equally homogeneous in the longitudinal and transverse directions. Due to its dimensional stability, MDF board is ideal for interior design elements. The MDF board is the proven solution for all interior applications. Due to the neutral substrate, the MDF board is excellently suited for coating in the desired colour shade. The homogeneous surface looks noble and yet natural. The thickness of up to 30 mm emphasises the three-dimensionality to the maximum. The OAK PLYWOOD panel consists of individual layers of wood, which are glued and pressed crosswise to their fibre direction. This reduces directional properties such as swelling and shrinkage. OAK PLYWOOD brings a natural wood look into the interior. The beautiful, rustic oak surface is protected from scratches and dirt with an invisible coating. The edges are black due to the laser cutting, which makes the wood surface stand out more and increases the depth effect. This combination of dark edges and oak brings that little extra to any room. CELLON® panel is a high-pressure laminate panel (HPL Compact or solid core panel) consisting of 70% cellulose webs and 30% phenolic resin. The extremely weather and frost-resistant material is ideal for outdoor applications. The HPL panel convinces with absolute moisture resistance and minimal expansion. In contrast to conventional HPL panels, CELLON® is characterized not only by the variety of shapes and colors available, but above all by its natural appearance. The colour is applied directly to the resin and thus the top layer, which means that the sterile resin surface does not stand out, but rather the selected color concept is ideally emphasized. Formats The raw panels are project-specifically cut to the desired dimensions using laser technology (including drill holes). You choose the width (x) and the length (y) of the panels individually. Do you want round cuts or additional cut-outs? Simply draw them in your DXF plan and they will be manufactured to size. Colours and Surfaces Free color design with a selection of over 3,000 colours. In addition to all NCS S Edition 2 and RAL colours, special colors with a metallic effect are also available. Alternatively, a surface made of natural oak plywood is on offer, too. The plate comes in combination with a felt for the perforation opening. With a selection of 44 colours, you will also find the right one here. Design The flexibility of laser cutting allows the perforation to be fully aligned and optimised to the requirement of the application. Thus, the designs can be specifically adapted for maximum sound absorption. Care is taken to ensure that there is as much open space as possible. Our collection here shows a selection (note labelling) with something for everyone. For the creative, we are also happy to produce the very personalised design at no extra cost. Construction Solutions The proportion of open space essentially influences the sound-absorbing effect of wall and ceiling elements. The Bruag design collections contain numerous variants with an open area proportion of 40% and more.